Miller 9-ft TurboLite EXTREME Twin-Leg PFL w/Steel Locking Rebar Hooks - MFLEC2-4/9FT

**No Longer Available** Call 614-449-9600 for Alternatives

Miller 9-ft TurboLite EXTREME Twin-Leg PFL w/Steel Locking Rebar Hooks - MFLEC2-4/9FT

The Miller TurboLite Extreme Sharp Edge Cable Lifeline for Sharp edge Applications

TurboLite EXTREME PFL for Sharp Edges 9-ft. Twin-Leg with galvanized steel cable lifeline and steel locking rebar hooks

Whether you work in construction, industrial, or even wind power, units for sharp and smooth edges as well as PFL and Tie-Back options will help you ensure workers are safe in applications requiring foot-level tie-off or work near edges.

• Safe Models are available for sharp and smooth edges. Sharp Edge models are ANSI Leading Edge certified. Smooth Edge models are designed for a radius ≥ 0.062 in. (1.6 mm).
• Versatile Can also be used for foot-level tie-off or anchored overhead as a traditional SRL for workers up to 420 lbs.
• Reliable Durable design with integral shock absorber is easy to repair and replace.
• Light Reduce fatigue, increase productivity.
• Simple Easy to install, easy to use.
• Configurable A range of working lengths featuring cable, web, and tie-back options.

Increases safety

Models available for sharp and smooth edges include an integral shock absorber to keep the lifeline intact in the event of a fall over an edge.

In work sites of every variety, edges are much more common than people realize and they pose a greater risk than you’d expect. Without protection designed for edges, traditional lifelines risk being severed. Designed for performance in sharp and smooth edge applications, the TurboLite Edge offers versatility, enhanced user mobility and maximum safety. The TurboLite Edge ensures workers are safe in applications requiring foot-level tie-off or working near edges.

Two buttons on harness connector positioned in two different planes require two distinct actions prevent accidental disengagement. A red indicator line gives a warning if the pin is not properly engaged.

Maximizes versatility for virtually any short-range application

Available in working lengths from 6-ft to 12-ft in twin and single configurations with cable or web lifelines accommodate a wide-range of applications. A variety of connector options including tie-back offer maximum versatility.

Provides protection for a wider range of workers

With a 420-lb (189 kg) weight capacity for all connections down to foot-level, Miller TurboLite Edge takes adaptability to new heights.

Enables quicker, easier installation

Forget about pin buttons that are difficult to operate and the troublesome need to connect the shock-absorber to the harness. With a single-click one pin connection you can focus on the task at hand.

Creates a better worker experience

Lightweight, compact harness connector with free-floating shock-absorber pack keeps workers cooler, and provides a more comfortable work experience. Integral swivel design increases worker mobility and prevents lifeline from twisting.

Requires less fall clearance

Compared to shock-absorbing lanyards, the TurboLite Edge is an effective solution for applications with limited fall clearance.

Lowers cost of ownership

High-impact nylon housing, abrasion-resistant webbing, durable harness connector and ballistic nylon shock absorber cover along with the ability to replace a damaged unit results in a decreased cost of ownership.

Ensures compatibility with all Miller harnesses

The product is compatible with all Miller harnesses, without any add-ons. No cumbersome straps to attach to the harness or special connectors are required for different harness sizes or configurations.

Prevents unit slippage

An optional Back D-Pad clip is included which is highly effective in preventing slippage and provides easier connection to the harness.

UPC: 612230232207