Ergodyne Squids 3790 Tool Shackle (2-Pack) - Stainless - XL

Squids 3790 Tool Shackle (2-Pack)

The Squids 3790 Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small or no captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.

STRAIGHTFORWARD INSTALLATION

To install, unscrew the crossbar and slide the U-shaped shackle around the neck or waist of the hand tool. Apply thread adhesive to the threads of the crossbar and reconnect, using a pair of pliers to firmly tighten the crossbar. Built with strong stainless steel, this tool shackle is durable and will not corrode in extreme environments.

TESTED TO BE TRUSTED

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 15lb // 6.8kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.

Four sizes of tool shackles are compatible on tools with diameters ranging from 0.40in // 10mm to 0.80in // 20mm. Reference the size chart for specific ranges per size.

Features:

• MEETS THE ANSI/ISEA 121-2018 STANDARD - Third party certified to an 15lb // 6.8kg maximum working capacity
• RETROFIT TOOL ATTACHMENT POINT - Designed to be installed on hand tools with small or no captive holes to create a tool attachment point for tethering
• EASY INSTALLATION - Unscrew crossbar, slide U-shaped shackle around neck or waist of hand tool, apply thread adhesive to threads and firmly tighten crossbar with a pair of pliers
• DURABLE & CORROSION-RESISTANT - Stainless steel construction will not corrode in extreme environments
• COMPATABILITY - Compatible with waisted/necked tools, such as wrenches, hammers and more
• MULTIPLE SIZES - Available in four sizes compatible with tools ranging from 0.40in // 10mm to 0.80in // 20mm
• INCLUDES 2 TOOL SHACKLES

Unit of Measure: Each