Desco 4" Floating Sander Bullnose Configuration w/Shroud

This is a dust free, medium sized sander that’s high in production. Offered in both pneumatic and electric models. The 4” tool uses the Roloc back-up pad and can use either the coated abrasive discs or conditioning discs.* The flat shroud allows for edge cleaning. The 4.5” tool uses a hook and loop back-up pad and the round shroud is best for environmental applications. Systems and kits available.

4” Floating Sander, Bullnose Configurations

150.319 Pneumatic 4” sander with bullnose shroud (capable of cleaning corners). Uses Roloc conditioning discs, Roloc coated abrasives, and Clean & Strip discs.
150.317 Pneumatic 4” bullnose sanding system with dust shroud. System includes 15 conditioning discs, 30 assorted coated abrasive discs, whip assembly (lubricator / evaporator / filter), and oil bottle all in a heavy duty non-corrosive carrying case.
150.320 Electric 4” sander with bullnose shroud (capable of cleaning corners). Uses Roloc conditioning discs, Roloc coated abrasives, and Clean & Strip discs. Can not be used with Rip disc or any 4.5” disc.
150.327 Electric 4” bullnose sanding system with dust shroud. System includes 15 conditioning discs, 30 assorted coated abrasive discs, and oil bottle all in a heavy duty non-corrosive carrying case.
* 4” Floating Bullnose can not be used with Rip disc or any 4.5” disc.

Specifications

Air Tool: 90 psi @ 18 cfm, RPM - 11,000
Electric Tool: 110 volt, 9 amps
Weight: 8 lbs.
RPM: 10,000
Note: * 4” bullnose sander can not be used with Rip disc or any 4.5” disc.