3M PELTOR Over-the-Head Earmuffs X2A/37271(AAD) 10 EA/Case

3M PELTOR X2 Earmuffs X2A/37271(AAD) - Over-the-Head - 10 EA/Case

3M Peltor X2A Over-the-Head Earmuffs, Hearing Conservation ,10 EA/Case

The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X2A is a lightweight, lower-profile earmuff designed for protection against low-to-moderate level industrial noise. The X2A utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. It features an electrically insulated wire headband, often referred to as “dielectric”. When correctly selected and worn, these products help reduce exposure to hazardous levels of noise. 3M PELTOR HYX2 Hygiene Kit offer replaceable ear cushions and foam liners to help keep your earmuffs clean and extend the service life. The 3M PELTOR X Series earmuffs are ideal for protection against noise arising from a wide range of applications in the workplace. Examples of typical applications include: metal processing, automotive, airports, construction, textile manufacturing, chemical and pharmaceutical manufacturing, cement manufacturing, printing, woodworking, heavy engineering, foundry, steelworks, and mining and quarrying. Also available in hard hat attachment model: 3M PELTOR XSeries CapMount Ear Muffs X2P3E. NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as “dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account all relevant hazards. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. *3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in hearing protector fit, fitting skill, and motivation of the user. If the NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations. 3M PSD products are for occupational use only.

Details:

• Earcups tilt to ensure a customized fit and comfort for individual users
• Electrically insulated (dielectric) wire headband helps reduce exposure to electrical hazards
• Over-the-head hearing protection with Noise Reduction Rating (NRR) of 24 dB for moderately high noise exposures
• Twin headband design helps reduce heat buildup with good fit and balance
• Wire headband offers comfortable pressure during prolonged usage

3M ID: 7000104071

UPC: 10093045937247

Legacy SKU: XA007707848

Catalog Number: X2A