3M Adflo Powered Air Purifying Respirator Battery 35-1099-07 - Lithium Ion

3M Adflo Powered Air Purifying Respirator Battery 35-1099-07 - Lithium Ion - 1 EA/Case

Replacement lithium ion battery for 3M Adflo Powered Air Purifying Respirator (PAPR). Lithium ion battery is approx. 50% lighter than the Adflo NiMh battery. It charges to 80% capacity in approx. 3 hours and to 100% capacity in approx. 6.5 hours.

3M Adflo Powered Air Purifying Respirator (PAPR) has been designed to help keep a welder comfortable throughout an entire shift. When paired with new filters, this respirator battery can last up to 10 - 12 hours. Lithium-ion technology enables a quicker charge than traditional batteries, allowing it to be used at 100% capacity after about 6.5 hours of charging. The 3M Adflo Powered Air Purifying Respirator is compatible with all 3M Speedglas welding helmets that require positive air pressure and 3M Versaflo headtops. As one of the most popular respirators of its kind in the world, the 3M Adflo Powered Air Purifying Respirator is designed to provide welders a constant nominal airflow rate of approximately 205 liters per minute, regardless of the battery’s charge or the particle loading of the filter. With the right type of filter and/or filter cartridge combination, the Adflo respirator helps reduce a welder’s exposure against both particles and gases—all in one system. The ergonomic leather belt is extra wide around the turbo unit for additional back support. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Details:

• DESIGNED FOR USE WITH — 3M Adflo Powered Air Purifying Respirator (PAPR) – Assembly (35-5401-01), that connects to 3M Speedglas welding helmets that require positive air pressure and 3M Versaflo headtops
• FAST CHARGE RESPIRATOR BATTERY — To 80% in about 3 hours, 100% in about 6.5 hours
• LIGHTWEIGHT — Lithium-ion battery technology is 50% lighter than the NiMh version
• LASTING WORKING TIME — Up to 10 - 12 hours of operating time when paired with new filters
• EXTENDED LIFE CYCLE — Battery pack designed for approximately 500 charge cycles
• For Industrial/Occupational Use Only — Not for consumer sale or use.

3M Part #: : 35-1099-07

3M ID #:: 7100025245

UPC/GTIN #: : 00051141560823